Usage Standard

Aluminium composite panels are easy to be processed and assembled. Well processed and assembled panels can help improve work efficiency, reduce work time, and save cost. Commonly used machines in metal and wood processing industries can be used to process aluminum composite panels.

• Cutting
  Both manual and motor-driven circular saws can both be used for cutting aluminum composite panels. Compressed air is usually adopted for blowing away aluminium powder.
• Cut by gang saw or shuttle saw
  Make sure to cut aluminum composite panels without damage to panel surfaces. Compressed air can be adopted for blowing away aluminium powder.
• Hole punching and hole expanding
  Aluminum composite panels should be holed by a high speed drilling machine with an iron drillbit. Lubrication oil is forbidden to be used, thus avoiding damage to the mounting surfaces. Here we can also use compressed air to blow away produced powder.
• Edge plane
  Electric planers and metal files can both be used for edge trimming of aluminum composite panels. Please make sure that there is no aluminum powder on panel surface while trimming.
• Rivet joint
  Riveted by nails.
• Cold bending
  Shouldn't be heat processed. While cold bending, a protective pad should be utilized to avoid damages to panel surface.
• Folding
  Firstly, underlay the aluminum composite panel with a layer of smooth material. Then, fold the panel with either an electric or pedal shear. Before folding, please make clear the surface and back.
• Cold folding
  Before cold folding, please mill a V-shaped groove at first. The groove width ranges from 2 to 8mm.
• Cold rolling
  It is recommended to utilize cold rolling machines which are equipped with smooth round rollers and pressure-adjustable function. Don't damage the surface of our aluminum composite panels.
• Screw joint
  Aluminium composite panels can be jointed together by stainless steel self-tapping screws or stainless steel wood screws.
• Bonded together by glues
  Our composite panels can be bonded together by metal adhesives. But don't bond the plastic part of our panels.
• Welding
  It is better to a heat sealing equipment. Firstly to groove on the panels and then to weld.
• Clamping
  Aluminium clips and stainless steel clips can be used to clamp panels together, and then joint panels tightly together by nails.
• Painting
  We can paint desire patterns on composite panels. Please note that the maximum drying temperature should be less than 600℃, or paint in accordance with professional technical requirements.
• Silk screen printing
  Silk screen printing machines can also be used to print patterns on composite panels.