We primarily produce fluorocarbon coated aluminum veneers. Since there is PVDF contained in fluorocarbon coating material, our fluorocarbon coated aluminium veneer is also called PVDF coated aluminum veneer.
We know that the quality of exterior fluorocarbon coating is vital to the quality of aluminum veneer curtain walls, so we adopt superior quality fluorocarbon coating materials from world leading manufacturers. Our fluorocarbon coating suppliers include PPG, DNT, AKZO, and NIPPON, etc. and they can provide a wide range of coating colors to satisfy our different demands.
Our aluminum veneer is primarily composed of a faceplate, a reinforced structure, and suspension loops.
Standard veneer thickness: 2.0mm, 2.5mm, 3.0mm
Variety of colors are available.
Aluminum veneers are usually chromized before they are fluorocarbon coated. The exterior fluorocarbon coating, which contains PVDF resin, features good corrosion resistance and weather resistance. Hence, our aluminum veneer has long service life and good resistance to acid rain, salt fog, strong UV, and extremely high or low temperatures, etc. Even used in harsh environment conditions, our aluminium veneer will not fade or effloresce easily.
Fluorocarbon coated
Porcelain fused
Marbleized
Marbleized
Wood grainedOur aluminum veneers, a kind of decorative building materials, are widely used for decorating both interior and exterior walls of various buildings, overhead walkways, elevators, and advertising boards.
| Testing Item | Technical requirement | ||
| Physical dimension | Length and width | ≤2000mm, allowable deviation ±1.0mm | |
| >2000mm, allowable deviation ±1.5mm | |||
| Diagonal | ≤2000mm, allowable deviation ±3.0mm | ||
| >2000mm, allowable deviation ±3.0mm | |||
| Planeness | Allowable deviation ≤1.5mm/m | ||
| Average thickness of dried coating | Second layer coating ≥30μm Third layer caoting≥40μm Fourth layer coating ≥55μm | ||
| Fluorocarbon coating | Color difference | No visible chromatic aberration. Computerized color-difference meter should be adopted for inspecting single color coating. △E≤2NBS | |
| Glossiness | Tolerance of limit value ≤±5 | ||
| Pencil hardness | ≥±1H | ||
| Adhesive force | Cross cut test, 100/100, 0 level | ||
| Max. impact strength (Frontal impact) | 50kgf.cm (490N.cm), no crack, no paint stripping | ||
| Chemical resistance | Resistance to hydrochloric acid | To drop hydrochloric acid liquid on aluminum veneer surface for 15 minutes continuously, no bubbles produced. | |
| Resistance to nitric acid | Color difference △E≤5NBS | ||
| Resistance to motor | Make no difference within 24 hours | ||
| Resistance to detergent | No bubbles and no stripping within 72 hours | ||
| Corrosion resistance | Resistance to dampness | 4,000 hours above GB1740 level 2 | |
| Resistance to salt fog | 4,000 hours above GB1740 level 2 | ||
| Weather resistance | Fading | △E≤5NBS when our veneer has been used for 10 years | |
| Efflorescence | GB1766 class 1 when our veneer has been used for 10 years | ||
| Glossiness maintenance | ≥50% when our aluminium veneer has been used for 10 years | ||
| Thickness loss | ≤10% when our aluminum veneer has been used for 10 years | ||
| specification | coating layer | unit | material |
| 2.0(1.85mm) | ≥30um | M2 | 1100H24 |
| 2.5(2.35mm) | ≥30um | M2 | 1100H24 |
| 3.0(2.85mm) | ≥30um | M2 | 1100H24 |
Jixiang Building Materials Corp. is a primary aluminum veneer manufacturer and supplier based in China. Since our inception, we have been committed to producing high quality building materials to both national and international customers. Depending on our advanced production technique, manufacturing equipment, and testing instruments, we can produce a variety of high quality construction materials, including aluminium veneers, aluminum honeycomb plates, aluminum composite panels, and aluminum coils, and more.
Due to our focus on quality control, our company has been ISO9001:2000 certified. Presently, our products are well accepted in Russia, Saudi Arabia, Iran, India, Singapore, and Indonesia, and more. If you need any of our construction materials, please contact us directly.
Company Brief: Jixiang Building Materials Corp. is a specialized decorative construction material manufacturer in China. Located in Songjiang district, Shanghai, China, our headquarters occupy an area of over 53,000m2 and have a total building area of 90,000 m2. We primarily manufacture PE aluminum composite panel, PVDF aluminum composite panel, aluminum foil, and construction adhesives, like all purpose adhesive, silicone glue, and more. Our high quality products have made us one of the members of the China Building Materials Federation. Over the years, we have developed into a large shareholding enterprise with following subsidiaries: Zhengzhou Climb Decoration Materials Co., Ltd., Zhengzhou Better Adhesives Co., Ltd., Zhejiang Liantai Instruments Co., Ltd., Yueqing Zhongtian Plastic Industry Co., Ltd., Yueqing Zhongtian Instruments Co., Ltd. and Shanghai Jiuzhi Paint Co., Ltd.
Offer Various Aluminum Composite Panels and Aluminum Coils
For Your Solution Over 25 Years!
The exterior wall of the building and the curtain wall panel.
The exterior of the old building was modified and refurbished.
Balcony, equipment unit, indoor compartment.
Interior wall decorative panels, ceilings, advertising signs.